Page not found!
Sorry, this page is not available...
| Current Path : /home/thenclexdoctor.com/.trash/vendor/google/apiclient-services/src/Compute/Resource/ |
| Current File : /home/thenclexdoctor.com/.trash/vendor/google/apiclient-services/src/Compute/Resource/Networks.php |
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute\Resource;
use Google\Service\Compute\ExchangedPeeringRoutesList;
use Google\Service\Compute\Network;
use Google\Service\Compute\NetworkList;
use Google\Service\Compute\NetworksAddPeeringRequest;
use Google\Service\Compute\NetworksGetEffectiveFirewallsResponse;
use Google\Service\Compute\NetworksRemovePeeringRequest;
use Google\Service\Compute\NetworksUpdatePeeringRequest;
use Google\Service\Compute\Operation;
/**
* The "networks" collection of methods.
* Typical usage is:
* <code>
* $computeService = new Google\Service\Compute(...);
* $networks = $computeService->networks;
* </code>
*/
class Networks extends \Google\Service\Resource
{
/**
* Adds a peering to the specified network. (networks.addPeering)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network resource to add peering to.
* @param NetworksAddPeeringRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function addPeering($project, $network, NetworksAddPeeringRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'network' => $network, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('addPeering', [$params], Operation::class);
}
/**
* Deletes the specified network. (networks.delete)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network to delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function delete($project, $network, $optParams = [])
{
$params = ['project' => $project, 'network' => $network];
$params = array_merge($params, $optParams);
return $this->call('delete', [$params], Operation::class);
}
/**
* Returns the specified network. (networks.get)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network to return.
* @param array $optParams Optional parameters.
* @return Network
* @throws \Google\Service\Exception
*/
public function get($project, $network, $optParams = [])
{
$params = ['project' => $project, 'network' => $network];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], Network::class);
}
/**
* Returns the effective firewalls on a given network.
* (networks.getEffectiveFirewalls)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network for this request.
* @param array $optParams Optional parameters.
* @return NetworksGetEffectiveFirewallsResponse
* @throws \Google\Service\Exception
*/
public function getEffectiveFirewalls($project, $network, $optParams = [])
{
$params = ['project' => $project, 'network' => $network];
$params = array_merge($params, $optParams);
return $this->call('getEffectiveFirewalls', [$params], NetworksGetEffectiveFirewallsResponse::class);
}
/**
* Creates a network in the specified project using the data included in the
* request. (networks.insert)
*
* @param string $project Project ID for this request.
* @param Network $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function insert($project, Network $postBody, $optParams = [])
{
$params = ['project' => $project, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('insert', [$params], Operation::class);
}
/**
* Retrieves the list of networks available to the specified project.
* (networks.listNetworks)
*
* @param string $project Project ID for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request. If you want to use AIP-160, your expression must
* specify the field name, an operator, and the value that you want to use for
* filtering. The value must be a string, a number, or a boolean. The operator
* must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
* are filtering Compute Engine instances, you can exclude instances named
* `example-instance` by specifying `name != example-instance`. The `:*`
* comparison can be used to test whether a key has been defined. For example,
* to find all objects with `owner` label use: ``` labels.owner:* ``` You can
* also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ``` If you want to use a regular
* expression, use the `eq` (equal) or `ne` (not equal) operator against a
* single un-parenthesized expression with or without quotes or against multiple
* parenthesized expressions. Examples: `fieldname eq unquoted literal`
* `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
* `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
* interpreted as a regular expression using Google RE2 library syntax. The
* literal value must match the entire field. For example, to filter for
* instances that do not end with name "instance", you would use `name ne
* .*instance`. You cannot combine constraints on multiple fields using regular
* expressions.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false. For example, when partial success behavior is enabled, aggregatedList
* for a single zone scope either returns all resources in the zone or no
* resources, with an error code.
* @return NetworkList
* @throws \Google\Service\Exception
*/
public function listNetworks($project, $optParams = [])
{
$params = ['project' => $project];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], NetworkList::class);
}
/**
* Lists the peering routes exchanged over peering connection.
* (networks.listPeeringRoutes)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string direction The direction of the exchanged routes.
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request. If you want to use AIP-160, your expression must
* specify the field name, an operator, and the value that you want to use for
* filtering. The value must be a string, a number, or a boolean. The operator
* must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
* are filtering Compute Engine instances, you can exclude instances named
* `example-instance` by specifying `name != example-instance`. The `:*`
* comparison can be used to test whether a key has been defined. For example,
* to find all objects with `owner` label use: ``` labels.owner:* ``` You can
* also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ``` If you want to use a regular
* expression, use the `eq` (equal) or `ne` (not equal) operator against a
* single un-parenthesized expression with or without quotes or against multiple
* parenthesized expressions. Examples: `fieldname eq unquoted literal`
* `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
* `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
* interpreted as a regular expression using Google RE2 library syntax. The
* literal value must match the entire field. For example, to filter for
* instances that do not end with name "instance", you would use `name ne
* .*instance`. You cannot combine constraints on multiple fields using regular
* expressions.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param string peeringName The response will show routes exchanged over
* the given peering connection.
* @opt_param string region The region of the request. The response will include
* all subnet routes, static routes and dynamic routes in the region.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false. For example, when partial success behavior is enabled, aggregatedList
* for a single zone scope either returns all resources in the zone or no
* resources, with an error code.
* @return ExchangedPeeringRoutesList
* @throws \Google\Service\Exception
*/
public function listPeeringRoutes($project, $network, $optParams = [])
{
$params = ['project' => $project, 'network' => $network];
$params = array_merge($params, $optParams);
return $this->call('listPeeringRoutes', [$params], ExchangedPeeringRoutesList::class);
}
/**
* Patches the specified network with the data included in the request. Only
* routingConfig can be modified. (networks.patch)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network to update.
* @param Network $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function patch($project, $network, Network $postBody, $optParams = [])
{
$params = ['project' => $project, 'network' => $network, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('patch', [$params], Operation::class);
}
/**
* Removes a peering from the specified network. (networks.removePeering)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network resource to remove peering from.
* @param NetworksRemovePeeringRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function removePeering($project, $network, NetworksRemovePeeringRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'network' => $network, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('removePeering', [$params], Operation::class);
}
/**
* Switches the network mode from auto subnet mode to custom subnet mode.
* (networks.switchToCustomMode)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network to be updated.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function switchToCustomMode($project, $network, $optParams = [])
{
$params = ['project' => $project, 'network' => $network];
$params = array_merge($params, $optParams);
return $this->call('switchToCustomMode', [$params], Operation::class);
}
/**
* Updates the specified network peering with the data included in the request.
* You can only modify the NetworkPeering.export_custom_routes field and the
* NetworkPeering.import_custom_routes field. (networks.updatePeering)
*
* @param string $project Project ID for this request.
* @param string $network Name of the network resource which the updated peering
* is belonging to.
* @param NetworksUpdatePeeringRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function updatePeering($project, $network, NetworksUpdatePeeringRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'network' => $network, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updatePeering', [$params], Operation::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(Networks::class, 'Google_Service_Compute_Resource_Networks');
Sorry, this page is not available...